A quick tour through UBayFS
Introduction
The UBayFS package implements the framework proposed in (Jenul et al. 2022), together with an interactive Shiny dashboard, which makes UBayFS applicable to R-users with different levels of expertise. UBayFS is an ensemble feature selection technique embedded in a Bayesian statistical framework. The method combines data and user knowledge, where the first is extracted via data-driven ensemble feature selection. The user can control the feature selection by assigning prior weights to features and penalizing specific feature combinations. In particular, the user can define a maximum number of selected features and must-link constraints (features must be selected together) or cannot-link constraints (features must not be selected together). A parameter ρ regulates the shape of a penalty term accounting for side constraints, where feature sets that violate constraints lead to a lower target value.
In this vignette, we use the Breast Cancer Wisconsin dataset (Wolberg and Mangasarian 1990) for
demonstration. Specifically, the dataset consists of 569 samples and 30
features and can be downloaded as a demo dataset by calling
data(bcw). The dataset describes a classification problem,
where the aim is to distinguish between malignant and benign cancer
based on image data. Features are derived from 10 image characteristics,
where each characteristic is represented by three features (summary
statistics) in the dataset. For instance, the characteristic
radius is represented by features radius mean,
radius standard deviation, and radius worst.
UBayFS is implemented via a core S3-class UBaymodel,
along with help functions. An overview of the ‘UBaymodel’ class and its
main generic functions is shown in the following diagram:
Requirements and dependencies
- R (>= 3.5.0)
- GA
- matrixStats
- shiny
- mRMRe
- Rdimtools
- DirichletReg
- ggplot2
- gridExtra
- utils
- hyper2
- methods
- prettydoc
In addition, some functionality of the package (in particular, the interactive Shiny interface) requires the following dependencies:
- shinyWidgets
- shinyalert
- DT
- RColorBrewer
- tcltk
- shinyjs
- shinythemes
- shinyBS
- testthat (>= 3.0.0)
- rmarkdown
- dplyr
- plyr
- knitr
Like other R packages, UBayFS is loaded using the
library(UBayFS) command. The sample dataset is accessed via
data(bcw).
Background
This section summarizes the core parts of UBayFS, where a central part is Bayes’ Theorem for two random variables θ and y: p(θ|y) ∝ p(y|θ) ⋅ p(θ), where θ represents an importance parameter of single features and y collects evidence about θ from an ensemble of elementary feature selectors. In the following, the concept will be outlined.
Ensemble feature selection as likelihood
The first step in UBayFS is to build M ensembles of elementary feature selectors. Each elementary feature selector m = 1, …, M selects features, denoted by a binary membership vector δ(m) ∈ {0, 1}N, based on a randomly selected training dataset, where N denotes the total number of features in the dataset. In the binary membership vector δ(m), a component δi(m) = 1 indicates that feature i ∈ {1, …, N} is selected, and δi(m) = 0 otherwise. Statistically, we interpret the result from each elementary feature selector as a realization from a multinomial distribution with parameters θ and l, where θ ∈ [0, 1]N defines the success probabilities of sampling each feature in an individual feature selection and l corresponds to the number of features selected in δ(m). Therefore, the joint probability density of the observed data $\boldsymbol{y} = \sum\limits_{m=1}^{M}\boldsymbol{\delta}^{(m)}\in\{0,\dots,M\}^N$ — the likelihood function — has the form $$ p(\boldsymbol{y}|\boldsymbol{\theta}) = \prod\limits_{m=1}^{M} f_{\text{mult}}(\boldsymbol{\delta}^{(m)};\boldsymbol{\theta},l),$$ where fmult is the probability density function of the multinomial distribution.
Expert knowledge as prior
UBayFS includes two types of expert knowledge: prior feature weights and feature set constraints.
Prior feature weights
To introduce expert knowledge about the importance of features, the user may define a vector α = (α1, …, αN), αi > 0 for all i = 1, …, N, assigning a weight to each feature. High weights indicate that a feature is important. By default, if all features are equally important or no prior weighting is used, α is set to the 1-vector of length N. With the weighting in place, we assume the a-priori feature importance parameter θ follows a Dirichlet distribution (Maier 2020) p(θ) = fDir(θ; α), where the probability density function of the Dirichlet distribution is given as $$f_{\text{Dir}}(\boldsymbol{\theta};\boldsymbol{\alpha}) = \frac{1}{\text{B}(\boldsymbol{\alpha})} \prod\limits_{n=1}^N \theta_n^{\alpha_n-1},$$ where B(.) denotes the multivariate Beta function. Generalizations of the Dirichlet distribution Hankin (2010) are also implemented in UBayFS.
Since the Dirichlet distribution is the conjugate prior with respect to a multivariate likelihood, the posterior density is given as p(θ|y) ∝ fDir(θ; α∘), with $$\boldsymbol{\alpha}^\circ = \left( \alpha_1 + \sum\limits_{m=1}^M \delta_1^{(m)}, \dots, \alpha_N + \sum\limits_{m=1}^M \delta_N^{(m)} \right)$$ representing the posterior parameter vector α∘.
Feature set constraints
In addition to the prior weighting of features, the UBayFS user can also add different types of constraints to the feature selection:
- max-size constraint: Maximum number of features that shall be selected.
- must-link constraint: For a pair of features, either both or none is selected (defined as pairwise constraints, one for each pair of features).
- cannot-link constraint: Used if a pair of features must not be selected jointly.
All constraints can be defined block-wise between feature blocks (instead of individual features). Constraints are represented as a linear system of linear inequalities Aδ − b ≤ 0, where A ∈ ℝK × N and b ∈ ℝK. K denotes the total number of constraints. For constraint k ∈ 1, .., K, a feature set δ is admissible only if (a(k))Tδ − b(k) ≤ 0, leading to the inadmissibility function (penalty term)
where ρ ∈ ℝ+ ∪ {∞} denotes a relaxation parameter and ξk, ρ = exp (−ρ((a(k))Tδ − b(k))) defines the exponential term of a logistic function. To handle K different constraints for one feature selection problem, the joint inadmissibility function is given as $$ \kappa(\boldsymbol{\delta}) = 1 - \prod\limits_{k=1}^{K} \left(1 -\kappa_{k,\rho}(\boldsymbol{\delta})\right)$$ which originates from the idea that κ = 1 (maximum penalization) if at least one κk, ρ = 1, while κ = 0 (no penalization) if all κk, ρ = 0.
To obtain an optimal feature set δ⋆, we use a target function U(δ, θ) which represents a posterior expected utility of feature sets δ given the posterior feature importance parameter θ, regularized by the inadmissibility function κ(.).
$$\mathbb{E}_{\boldsymbol{\theta}|\boldsymbol{y}}[U(\boldsymbol{\delta}, \boldsymbol{\theta}(\boldsymbol{y}))] = \boldsymbol{\delta}^T \mathbb{E}_{\boldsymbol{\boldsymbol{\delta}}|\boldsymbol{y}}[\boldsymbol{\theta}(\boldsymbol{y})]-\lambda\kappa(\boldsymbol{\delta})\longrightarrow \underset{\boldsymbol{\delta}\in\{0,1\}^N}{\text{arg max}} $$
Since an exact optimization is impossible due to the non-linear function κ, we use a genetic algorithm to find an appropriate feature set. In detail, the genetic algorithm is initialized via a Greedy algorithm and computes combinations of the given feature sets with regard to a fitness function in each iteration.
Application of UBayFS
Ensemble Training
The function build.UBaymodel() initializes the UBayFS
model and trains an ensemble of elementary feature selectors. The
training dataset and target are initialized with the arguments
data and target. Although the UBayFS concept
also permits unsupervised and multiclass setups, the current
implementation only supports binary and regression target variables.
While M defines the ensemble size (number of elementary
feature selectors), the types of the elementary feature selectors is set
via method. Three different feature selectors (mRMR, Fisher
schore and Laplace score) are implemented as baseline. In general, the
method argument allows for each self-implemented feature
selection function with the arguments X (describes the
data), y (describes the target), n (describes
the number of features that shall be selected), and name
(name of the method). The function must return the indices of the
selected features and the input name. An example with classification
trees is shown below. Each ensemble model is trained on a random subset
comprising tt_split⋅100
percent of the train data. The help function
buildConstraints() provides an easy way to define side
constraints for the model. Using the argument prior_model
the user specifies whether the standard Dirichlet distribution or a
generalized variant should be used as prior model. Furthermore, the
number of features selected in each ensemble can be controlled by the
parameter nr_features.
For the standard UBayFS initialization, all prior feature weights are
set to 1, and no feature constraints are included yet. The
summary() function provides an overview of the dataset, the
prior weights, and the likelihood — ensemble counts indicate how often a
feature was selected over the ensemble feature selections.
model = build.UBaymodel(data = bcw$data,
target = bcw$labels,
M = 100,
tt_split = 0.75,
nr_features = 10,
method = "mRMR",
prior_model ="dirichlet",
weights = 0.01,
lambda = 1,
constraints = buildConstraints(constraint_types = c("max_size"),
constraint_vars = list(3),
num_elements = dim(bcw$data)[2],
rho = 1),
optim_method = "GA",
popsize = 100,
maxiter = 100,
shiny = FALSE
)
summary(model)
#> UBayFS model summary
#> data: 569x30
#> labels: B: 357 M: 212
#>
#> === constraints ===
#> - - - - - - - - - - group 1 - - - - - - - - - -
#> constraint 1: (1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1) x <= 3; rho = 1
#>
#> === prior weights ===
#> weights: ( 0.01,0.01,0.01,0.01,0.01,0.01,0.01,0.01,0.01,0.01,0.01,0.01,0.01,0.01,0.01,0.01,0.01,0.01,0.01,0.01,0.01,0.01,0.01,0.01,0.01,0.01,0.01,0.01,0.01,0.01 )
#>
#> === likelihood ===
#> ensemble counts: ( 0,16,75,0,0,0,100,100,0,0,0,0,3,100,0,0,4,0,0,0,100,83,100,100,1,18,100,100,0,0 )
#>
#> === feature selection results ===
#> no output produced yetThe prior constraints are shown as a linear inequation system together with the penalty term ρ. Further, the current prior weight and the ensemble feature counts (likelihood) for each feature are printed. As the model is not trained yet, the final feature selection result is empty.
In addition to mRMR, we add a function
decision_tree() that computes features based on decision
tree importances.
library(rpart)
decision_tree <- function(X, y, n, name = "tree"){
rf_data = as.data.frame(cbind(y, X))
colnames(rf_data) <- make.names(colnames(rf_data))
tree = rpart::rpart(y~., data = rf_data)
return(list(ranks= which(colnames(X) %in% names(tree$variable.importance)[1:n]),
name = name))
}
model = build.UBaymodel(data = bcw$data,
target = bcw$labels,
M = 100,
tt_split = 0.75,
nr_features = 10,
method = c("mRMR", decision_tree),
prior_model ="dirichlet",
weights = 0.01,
lambda = 1,
constraints = buildConstraints(constraint_types = c("max_size"),
constraint_vars = list(3),
num_elements = dim(bcw$data)[2],
rho = 1),
optim_method = "GA",
popsize = 100,
maxiter = 100,
shiny = FALSE
)Examples for more feature selection methods are:
# recursive feature elimination
library(caret)
rec_fe <- function(X,y,n, name="rfe"){
if(is.factor(y)){
control <- rfeControl(functions=rfFuncs, method = "cv", number = 2)
}
else{
control <- rfeControl(functions=lmFuncs, method = "cv", number = 2)
}
results <- caret::rfe(X, y, sizes = n, rfeControl=control)
return(list(ranks = which(colnames(X) %in% results$optVariables),
name = name))
}
# Lasso
library(glmnet)
lasso <- function(X, y, n=NULL, name="lasso"){
family = ifelse(is.factor(y), "binomial", "gaussian")
cv.lasso <- cv.glmnet(as.matrix(X), y, intercept = FALSE, alpha = 1, family = family, nfolds=3)
model <- glmnet(as.matrix(X), y, intercept = FALSE, alpha = 1, family = family,
lambda = cv.lasso$lambda.min)
return(list(ranks = which(as.vector(model$beta) != 0),
name = name))
}
# HSIC Lasso
library(GSelection)
hsic_lasso <- function(X, y, n, name="hsic"){
ifelse(is.factor(y), {tl = as.numeric(as.integer(y)-1)}, {tl = y})
results = feature.selection(X, tl, n)
return(list(ranks = results$hsic_selected_feature_index,
name = name))
}User knowledge
Using the function setWeights() the user is able to
change the feature weights from the standard initialization to desired
values. In our example, we assign equal weights to features originating
from the same image characteristic. Weights can be on an arbitrary
scale. As it is difficult to specify prior weights in real-life
applications, we suggest to define them on a normalized scale.
weights = rep(c(10,15,20,16,15,10,12,17,21,14), 3)
strength = 1
weights = weights * strength / sum(weights)
print(weights)
#> [1] 0.02222222 0.03333333 0.04444444 0.03555556 0.03333333 0.02222222 0.02666667 0.03777778 0.04666667 0.03111111 0.02222222 0.03333333 0.04444444 0.03555556 0.03333333 0.02222222 0.02666667 0.03777778 0.04666667 0.03111111 0.02222222 0.03333333 0.04444444 0.03555556 0.03333333 0.02222222 0.02666667 0.03777778 0.04666667 0.03111111
model = setWeights(model = model,
weights = weights)In addition to prior weights, feature set constraints may be
specified. Internally, constraints are implemented via an S3-class
UBayconstraint, depicted in the following diagram:
Rather than calling the constructor method directly, the help
function buildConstraints() may be used to facilitate the
definition of a set of constraints: the input
constraint_types consists of a vector, where all constraint
types are defined. Then, with constraint_vars, the user
specifies details about the constraint: for max-size, the number of
features to select is provided, while for must-link and cannot-link, the
set of feature indices to be linked must be provided. Each list entry
corresponds to one constraint in constraint_types. In
addition, num_features denotes the total number of features
in the dataset (or the total number of blocks if the constraint is
block-wise) and rho corresponds to the relaxation parameter
of the admissibility function. For block constraints, information about
the block structure is included either with block_listor
block_matrix - if both arguments are NULL,
feature-wise constraints are generated.
Applying print(constraints) demonstrates that, the
matrix A has ten rows to represent four constraints. While
max-size and cannot-link can be expressed in one
equation each, must-link is a pairwise constraint. In specific,
the must-link constraint between n features produces $\frac{n!}{(n-2)!}$ elementary constraints.
Hence, six equations represent the must-link constraint. The
function setConstraints() integrates the constraints into
the UBayFS model.
constraints = buildConstraints(constraint_types = c("max_size",
"must_link",
rep("cannot_link", 2)),
constraint_vars = list(10, # max-size (maximal 10 features)
c(1,11,21), # must-link between features 1, 11, and 21
c(1,10), # cannot-link between features 1, and 10
c(20,23,24)), # cannot-link between features 20, 23, and 24
num_elements = ncol(model$data),
rho = c(Inf, # max_size
0.1, # rho for must-link
1, # rho for first cannot-link
1)) # rho for second cannot-link
print(constraints)
#> A
#> [,1] [,2] [,3] [,4] [,5] [,6] [,7] [,8] [,9] [,10] [,11] [,12] [,13] [,14] [,15] [,16] [,17] [,18] [,19] [,20] [,21] [,22] [,23] [,24] [,25] [,26] [,27] [,28] [,29] [,30]
#> [1,] 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
#> [2,] -1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
#> [3,] -1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0
#> [4,] 1 0 0 0 0 0 0 0 0 0 -1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
#> [5,] 0 0 0 0 0 0 0 0 0 0 -1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0
#> [6,] 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -1 0 0 0 0 0 0 0 0 0
#> [7,] 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 -1 0 0 0 0 0 0 0 0 0
#> [8,] 1 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
#> [9,] 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 1 0 0 0 0 0 0
#> b
#> [1] 10 0 0 0 0 0 0 1 1
#> rho
#> [1] Inf 0.1 0.1 0.1 0.1 0.1 0.1 1.0 1.0
#> block_matrix
#> [,1] [,2] [,3] [,4] [,5] [,6] [,7] [,8] [,9] [,10] [,11] [,12] [,13] [,14] [,15] [,16] [,17] [,18] [,19] [,20] [,21] [,22] [,23] [,24] [,25] [,26] [,27] [,28] [,29] [,30]
#> [1,] 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
#> [2,] 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
#> [3,] 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
#> [4,] 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
#> [5,] 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
#> [6,] 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
#> [7,] 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
#> [8,] 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
#> [9,] 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
#> [10,] 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
#> [11,] 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
#> [12,] 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
#> [13,] 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
#> [14,] 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
#> [15,] 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
#> [16,] 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0
#> [17,] 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0
#> [18,] 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0
#> [19,] 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0
#> [20,] 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0
#> [21,] 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0
#> [22,] 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0
#> [23,] 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0
#> [24,] 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0
#> [25,] 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0
#> [26,] 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0
#> [27,] 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0
#> [28,] 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0
#> [29,] 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
#> [30,] 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
model = setConstraints(model = model, constraints = constraints)Optimization and evaluation
A genetic algorithm, described by (Givens and
Hoeting 2012) and implemented in (Scrucca
2013), searches for the optimal feature set in the UBayFS
framework. Using setOptim() we initialize the genetic
algorithm. Furthermore, popsize indicates the number of
candidate feature sets created in each iteration, and
maxiter is the number of iterations.
At this point, we have initialized prior weights, constraints, and
the optimization procedure — we can now train the UBayFS model using the
generic function train(), relying on a genetic algorithm.
The summary() function provides an overview of all
components of UBayFS. The plot() function shows the prior
feature information as bar charts, with the selected features marked
with red borders. In addition, the constraints and the regularization
parameter ρ are presented.
model = UBayFS::train(x = model)
#> Running Genetic Algorithm
summary(model)
#> UBayFS model summary
#> data: 569x30
#> labels: B: 357 M: 212
#>
#> === constraints ===
#> - - - - - - - - - - group 1 - - - - - - - - - -
#> constraint 1: (1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1) x <= 10; rho = Inf
#> constraint 2: (-1,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0) x <= 0; rho = 0.1
#> constraint 3: (-1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0) x <= 0; rho = 0.1
#> constraint 4: (1,0,0,0,0,0,0,0,0,0,-1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0) x <= 0; rho = 0.1
#> constraint 5: (0,0,0,0,0,0,0,0,0,0,-1,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0) x <= 0; rho = 0.1
#> constraint 6: (1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,-1,0,0,0,0,0,0,0,0,0) x <= 0; rho = 0.1
#> constraint 7: (0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,-1,0,0,0,0,0,0,0,0,0) x <= 0; rho = 0.1
#> constraint 8: (1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0) x <= 1; rho = 1
#> constraint 9: (0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,1,1,0,0,0,0,0,0) x <= 1; rho = 1
#>
#> === prior weights ===
#> weights: ( 0.0222222222222222,0.0333333333333333,0.0444444444444444,0.0355555555555556,0.0333333333333333,0.0222222222222222,0.0266666666666667,0.0377777777777778,0.0466666666666667,0.0311111111111111,0.0222222222222222,0.0333333333333333,0.0444444444444444,0.0355555555555556,0.0333333333333333,0.0222222222222222,0.0266666666666667,0.0377777777777778,0.0466666666666667,0.0311111111111111,0.0222222222222222,0.0333333333333333,0.0444444444444444,0.0355555555555556,0.0333333333333333,0.0222222222222222,0.0266666666666667,0.0377777777777778,0.0466666666666667,0.0311111111111111 )
#>
#> === likelihood ===
#> ensemble counts: ( 0,16,75,0,0,0,100,100,0,0,0,0,3,100,0,0,4,0,0,0,100,83,100,100,1,18,100,100,0,0 )
#>
#> === feature selection results ===
#> ( 2,3,7,8,14,22,23,26,27,28 )
plot(model)
After training the model, we receive a feature selection result. More
than one optimal feature set with the same MAP score is possible. The
plot shows the selected features (red framed) and their selection
distribution between ensemble feature selection and prior weights. The
constraints are shown at the top, where a connecting line is drawn
between features of one constraint. The final feature set and its
additional properties can be evaluated with
evaluateFS():
# evaluation feature set
evaluateMultiple(state = model$output$feature_set, model = model)
#> [,1]
#> cardinality 10.000
#> log total utility -0.234
#> log posterior feature utility -0.234
#> log admissibility 0.000
#> number of violated constraints 0.000
#> avg feature correlation 0.614The output contains the following information:
- cardinality: number of selected features
- log total utility: value of the target function for optimization
- log posterior feature utility: cumulated importances of selected features before substracting a penalization term
- log admissibility: if 0, all constraints are fulfilled, otherwise at least one constraint is violated
- number violated constraints: number of violated constraints
- avg feature correlation: average correlation between features in dataset
Shiny dashboard
UBayFS provides an interactive R Shiny
dashboard as GUI. With its intuitive user interface, the user can load
data, set likelihood parameters, and even control the admissibility
regularization strength of each constraint. With the command
runInteractive(), the Shiny dashboard opens, given that the
required depedencies are available (see above). Histograms and plots
help to get an overview of the user’s settings. The interactive
dashboard offers save and load buttons to save
or load UBayFS models as RData files. Due to computational limitations,
it is not recommended to use the HTML interface for larger datasets
( > 100 features or > 1000 samples).
The dashboard includes multiple tabs:
- data: Load the dataset and specify whether row names, column names or a block structure is present. A demo dataset is ready to be loaded and used for a first touch on the package.
- likelihood: Select elementary feature selectors for ensemble feature selection, the number of models M, the number of features in each model, and the ratio of the train-test split. Further, the dashboard allows the user to mix different elementary feature selectors, although this option is not recommended due to limited stability (Seijo-Pardo et al. 2017).
- weights: The prior feature weights are set by the user. For block feature selection, it is possible to set weights for blocks; otherwise, for a single feature.
- constraints / block constraints: In this task, the user sets different constraints (at least a max-size constraint). The penalty ρ can be varied here as well.
- feature selection: In the dashboard’s last step, an optimization procedure determines the final feature set. A plot of the final result is produced - also, the model can be saved as an Rdata file and loaded to the dashboard again.
Conclusion
With the methodology in place, UBayFS is applicable to a large range of feature selection problems with multiple sources of information. The likelihood parameters, steering the number of elementary models, mainly affect the stability and runtime of the result — the latter linearly increases with the number of models. Especially the Shiny dashboard delivers insight into the single UBayFS steps. Nevertheless, the dashboard only applies to smaller datasets, while larger ones should be computed in the console.